HYPER-AL – PICO-ITX SBC supports Intel® 14nm Apollo Lake on-board SoC


  • PICO-ITX SBC supports Intel® 14nm Apollo Lake on-board SoC supports Intel® 14nm Apollo Lake on-board SoC
  • Dual GbE LAN support
  • Flexible expansion with M.2 A key 2230 and M.2 B key 2242 support
  • HDMI and internal LVDS for independent display
  • 12V only single voltage design for AT/ATX power by DC power jack


Dimensions 100mm x 72mm
Display Output 1 x HDMI
1 x LVDS (2×10 pin, single channel, 24bit)
Humidity 5% ~ 95%, non-condensing
Operating Temperature -20°C ~ 60°C
Storage Temperature -10°C ~ 70°C
I/O Interface
Audio 1 x HD audio (2 x 5 pin, support 7.1 channel HD audiou by AC-KIT-892HD-R10)
CAN-Bus LAN1: Realtek RTL8111H controller
LAN2: Realtek RTL8111H controller
Ethernet 1 x 8-bit DIO (2×5 pin, P=2.0)
Expansion 1 x M.2 A key 2230 (PCIe, USB)
1 x M.2 B key 2242 (USB, SATA)
I/O Interface
I/O Interface 1 x Front panel(1 x 8 pin, power LED, HDD LED, power buttom, reset buttom)
1 x RS-232(1×9 pin, P=1.25)
1 x SATA 6Gb/s(w/ 5V SATA PWR)
2 x USB 2.0(2 by pin header, 2×4 pin, P=2.0)
2 x USB 3.0(on rear I/O)
Power consumption 12V@2.36A (Intel® Celeron® N3350 with 8GB 1600MHz DDR3L memory)
Power Supply 12V DC input only (DC jack)
Support AT/ATX mode
SoC Intel® Celeron® N3350 on-board SoC (up to 2.4GHz, dual-core, 2M Cache, TDP=6W)
Graphics Controller Intel® HD Graphics Gen9 Low Power, 18 Execution Units
4K Codec Decode & Encode for HEVC 4, H.264, VP8, SVC, MVC
Memory Max. One 204-pin 1866/1600MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot (system max. 8GB)
Watchdog Timer
Watchdog Timer Software programmable support 1~255 sec. system reset
Weight GW:600g/NW:250g


HYPER-AL-N1-R10 PICO-ITX SBC supports Intel® 14nm dual-core Celeron® N3350 2.4GHz on-board SoC with HDMI, LVDS, dual LAN, M.2, USB3.0, SATA 6GB/s, COM and RoHS