Tour Bus PA System, Din Mount w/ Aux Input, Mic Inputs & Rear Aux. 4 x 45 Watts Max & Mic Inputs (Motor Coach, Bus, Dynamic or HS).
SPECIFICATIONS
Audio
Electronic Volume Control (Rotary Encoder Knob)
Electronic Fader/Balance Controls (N/A for Mics)
Electronic Bass/Treble Controls (N/A for Mic #1)
Loudness
Speaker Short Circuit protection to ground
Speaker Impedance => 4-8 ohms
Maximum Output Power => 4 x 45 watts
Input/Output
Power/Speaker: 3-Row, ISO plug (Sections A,B,C)
Mic #1 input: Accepts Power Mic., 4-wire, Ground enable trigger (Mic Vol Ctrl)
Mic #2 input: Accepts Dynamic Mic Signal, 4-wire, Ground enable trigger (Radio Vol)
Mic #3 input: Accepts Condenser Mic, 4-wire, Ground enable trigger (Radio Vol)
Aux input: 3.5 mm Aux input, front panel of radio.
Aux Input #1: Optional Rear connection, (Requires CBLGP0170AE)
Trigger out: Video button, momentary push, enable ground trigger turn on, external relay
Display
Positive type LCD
Green LED Back Lighting
Wide Viewing Angle
General
Chassis type: ISO-Din
Operating Voltage: 12 Volts DC, Negative Ground
Manual Dimming: Set backlighting illumination brightness
Fuse memory power: 10 Amps
Speaker Output Wiring: Floating-GND (No bridge connection allowed)
Mic hot key button: Keying microphone with PA turn off and IGN, on, activates Public Address System.
Volume Memory: Mic #2, #3, tuner & Aux input volume levels retained in radio memory. This eliminates the need to repeatedly adjust volume levels when selecting between modes.
Alarm Clock: Yes
Digital Clock: Digital Clock: 12 Hour Clock (Time Default)
Video button: Activates Aux #2 (rear radio) and output trigger on. Provides ground to relay or device.
Conformal Coated PCB: Yes
Fixed trim ring: Yes
Accessories Included
Din Sleeve: Yes
Bracket Release Keys: Quantity 2
Rear Support Stud: Yes
Serial No. Label: Yes
Warranty Card: Yes
Retail Packaging: Yes
Owner’s Manual: Yes
Compatibility
Direct Replacement for Custom Radio Corp – PA
