PSM-5860V – 860W PS/2 Power Supply

  • TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃
  • HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
  • HUMIDITY: OPERATING:20%-80%, NON-OPERATING:10%-90%
  • EFFICIENCY: TYPICAL 80-85% AT 25℃ 115V FULL LOAD
  • OVER POWER PROTECTOIN: 110%~150%
  • OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.8~6.7V, +12V→13.2~15V
  • OVER CURRENT PROTECTION: +3.3V→29.7~40.2A, +5V→29.7~40.2A, +12V→63.7~86.2A
  • SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
  • RESTART AFTER PROTECTION: IF THE PSU IS USING AC POWER SWITCH TO CONTROL ON/OFF, IT HAS TO BE SWITCHED OFF AT LEAST FOR 5 SECONDS TO RESTART THE UNIT
  • SAFETY: TO MEET UL, CUL, TUV, CCC
  • COOLING: ONE 60 mm DC FAN

DIMENSION

160x150x86(mm)
6.3×5.91×3.39(inch)

INPUT SPEC

VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 HZ
INPUT CURRENT: 12 A ( RMS ) FOR 115VAC /
6A ( RMS ) FOR 230VAC
INRUSH CURRENT: 20A MAX. FOR 115 VAC /
40A MAX. FOR 230 VAC
PFC CAN REACH THE TARGET OF 95% @230V, FULL LOAD

DC OUTPUT SPEC

Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V 0.5 25 ±5% ±1% 50mV
+12V 1 60 ±5% ±1% 120mV
-12V 0 0.8 ±5% ±1% 120mV
+3.3V 0.5 25 ±5% ±1% 50mV
+5VSB 0.1 3.5 ±5% 50mV