{"id":13760,"date":"2024-09-09T18:50:29","date_gmt":"2024-09-09T18:50:29","guid":{"rendered":"https:\/\/millertech.com\/?post_type=product&p=13760"},"modified":"2024-09-13T14:40:27","modified_gmt":"2024-09-13T14:40:27","slug":"ae-1000e-tour-bus-din-mount-public-address-pa-system","status":"publish","type":"product","link":"https:\/\/millertech.com\/product\/ae-1000e-tour-bus-din-mount-public-address-pa-system\/","title":{"rendered":"AE-1000E – Tour Bus DIN Mount Public Address (PA) System"},"content":{"rendered":"
Tour Bus PA System, Din Mount w\/ Aux Input, Mic Inputs & Rear Aux. 4 x 45 Watts Max & Mic Inputs (Motor Coach, Bus, Dynamic or HS).<\/p>\n
Electronic Volume Control (Rotary Encoder Knob)
\nElectronic Fader\/Balance Controls (N\/A for Mics)
\nElectronic Bass\/Treble Controls (N\/A for Mic #1)
\nLoudness
\nSpeaker Short Circuit protection to ground
\nSpeaker Impedance => 4-8 ohms
\nMaximum Output Power => 4 x 45 watts<\/p>\n
Power\/Speaker: 3-Row, ISO plug (Sections A,B,C)
\nMic #1 input: Accepts Power Mic., 4-wire, Ground enable trigger (Mic Vol Ctrl)
\nMic #2 input: Accepts Dynamic Mic Signal, 4-wire, Ground enable trigger (Radio Vol)
\nMic #3 input: Accepts Condenser Mic, 4-wire, Ground enable trigger (Radio Vol)
\nAux input: 3.5 mm Aux input, front panel of radio.
\nAux Input #1: Optional Rear connection, (Requires CBLGP0170AE)
\nTrigger out: Video button, momentary push, enable ground trigger turn on, external relay<\/p>\n
Positive type LCD
\nGreen LED Back Lighting
\nWide Viewing Angle<\/p>\n
Chassis type: ISO-Din
\nOperating Voltage: 12 Volts DC, Negative Ground
\nManual Dimming: Set backlighting illumination brightness
\nFuse memory power: 10 Amps
\nSpeaker Output Wiring: Floating-GND (No bridge connection allowed)
\nMic hot key button: Keying microphone with PA turn off and IGN, on, activates Public Address System.
\nVolume Memory: Mic #2, #3, tuner & Aux input volume levels retained in radio memory. This eliminates the need to repeatedly adjust volume levels when selecting between modes.
\nAlarm Clock: Yes
\nDigital Clock: Digital Clock: 12 Hour Clock (Time Default)
\nVideo button: Activates Aux #2 (rear radio) and output trigger on. Provides ground to relay or device.
\nConformal Coated PCB: Yes
\nFixed trim ring: Yes<\/p>\n
Din Sleeve: Yes
\nBracket Release Keys: Quantity 2
\nRear Support Stud: Yes
\nSerial No. Label: Yes
\nWarranty Card: Yes
\nRetail Packaging: Yes
\nOwner’s Manual: Yes<\/p>\n
Direct Replacement for Custom Radio Corp – PA<\/p>\n
<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"