4K Quadruple Independent Displays

The WAFER-ADL-P integrates Intel® Iris® Xe Graphics, delivering up to 2.47x faster graphics performance compared to 11th Gen Intel Core processors. With Intel® Iris® Xe Graphics, the board can feature up to 96 graphics EUs and also provide up to four concurrent 4K independent displays. This is ideal for video wall and surveillance applications.

Outwards-facing Expansions:

Two PCIe x1 / One PCIe x2

The outwards-facing riser card, NWR-L2S, enables the connection of up to two outwards-facing PCIe x1 slots via one PCI Express interface. Although may take up more space, it can help enhance the airflow and heat transfer within the system. It is ideal for the chassis that is wide enough for the expansion card to be placed.

Inwards-facing Expansions:
Two PCIe x1 / One PCIe x2

The inwards-facing riser card, NWR-R2S, enables the connection of up to two inwards-facing PCIe x1 slots via one PCI Express interface. It is suitable for installation where space is limited. With higher height to increase spacing between boards, it can ensure efficient heat dissipation for space-constrained applications.

PCIe x4 Interface Card Expansion

The PCIe Gen3 x4 (x2 signal) slot, providing high-speed data transfer rate of up to 2GB/s, allows for additional customization and expansion. Directly installing a PCIe card enables the motherboard to run more complex and challenging tasks at the edge.

Enhanced Stability and Easy Installation

Both of the riser cards can be firmly secured to enhance stability by using the L-shaped bracket, in which screw holes are perfectly matched with those on the side of the heat spreader to make it simple and easy to install.

DIMENSIONS

WAFER-ADL-P

SBC with Outwards Facing Riser Card

SBC with Inwards Facing Riser Card

SPECIFICATIONS

System
CPU	12th/13th Gen. Intel® mobile Alder Lake-P/Raptor Lake-P on board SoC
Memory	On-board LPDDR4x 3200 MHz 8GB up to 32GB
Memory Max.	32GB
Physical Characteristics
Dimensions (LxWxH) (mm)	146mm x 102mm
Net Weight	350g
Storage
Storage	1 x SATA : 6Gb/s
	1 x M.2(NGFF): M.2 M Key 2242/2280 (PCIe Gen3 x4)
I/O Interface
Display Output	2 x HDMI: up to 4096×2160 @ 30Hz
	2 x Display Port: up to 4096 x 2160 @60Hz
Ethernet	2 x LAN – LAN1: Intel® I225V/I226V 2.5GbE controller LAN2: Intel® I225V/I226V 2.5GbE controller
Audio	1 x HD Audio: 1 x iAUDIO, support IEI AC-KIT-888S Audio Module (2×5 pin)
I/O Interface	4 x Internal RS-232: 2×5 pin, P=2.0
	2 x Internal RS-232/422/485: 2×5 pin, P=2.0
	4 x Internal USB 2.0: 2×4 pin, P=2.0
	4 x External USB 3.2 Gen2x1: 10Gb/s(Type A)
Expansion	1 x PCIe x4: PCIe Gen3 x4 (x4 & x2+x2)
	3 x M.2(NGFF) – 1 x M.2 A Key 2230 for WIFI & BT (PCIe Gen3 x 1 & USB 2.0) 1 x M.2 M Key 2242/2280 (PCIe Gen3 x4) 1 x M.2 B Key 3042 (PCIe x2 & USB 2.0) 1 x On-board SIM card socket (hinge type) for M.2 B key
Power
Power Consumption	12V@2.83A (12th Gen Intel® Core i7-1265UE CPU with 8 GB 3200 MHz LPDDR4x memory, max. loading, EuP mode enabled)
Power Supply	ATX/AT power supply Support AT/ATX mode ErP/EuP Compliant
Environment
Operating Temperature	-10°C ~ 60°C
Storage Temperature	-30°C ~ 70°C
Humidity	5% ~95%, non-condensing

ORDERING

WAFER-ADL-P-i7C-R10	3.5 SBC supports Intel® Alder Lake-P Core i7-1255U Processor with 8GB LPDDR4x memory on board default, with DP, HDMI, dual 2.5 GbE, USB 3.2 gen 2, M.2, SATA 6Gb/s, COM, PCIe x4 for riser card and RoHS
WAFER-ADL-P-i5C-R10	3.5 SBC supports Intel® Alder Lake-P Core i5-1235U Processor with 8GB LPDDR4x memory on board default, with DP, HDMI, dual 2.5 GbE, USB 3.2 gen 2, M.2, SATA 6Gb/s, COM, PCIe x4 for riser card and RoHS
WAFER-ADL-P-i3C-R10	3.5 SBC supports Intel® Alder Lake-P Core i3-1215U Processor with 8GB LPDDR4x memory on board default, with DP, HDMI, dual 2.5 GbE, USB 3.2 gen 2, M.2, SATA 6Gb/s, COM, PCIe x4 for riser card and RoHS
WAFER-ADL-P-CC-R10	3.5 SBC supports Intel® Alder Lake-P Celeron® 7305 SoC Processor with 8GB LPDDR4x memory on board default, with DP, HDMI, dual 2.5 GbE, USB 3.2 gen 2, M.2, SATA 6Gb/s, COM, PCIe x4 for riser card and RoHS

PACKAGE CONTENTS

The post WAFER-ADL-P – 3.5″ SBC supports Intel Core i7/i5/i3 and Celeron® processors appeared first on Miller Technologies.

SPECIFICATIONS

System
CPU	10 th / 11 th Generation LGA1200 Intel® Core i9/i7/i5/i3, Celeron® and Pentium® processors
Chipset	Intel® Q470/Q470E
Memory	Four 288-pin 2933 MHz dual-channel unbuffered DDR4 SDRAM DIMM slots, supporting up to 128 GB memory
Memory Max.	up to 128 GB memory
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 2 x System fan connector (1×3 pin)
Storage
Storage	1 x M.2(NGFF): M-key 2242/2280 (PCIe Gen3 x2, SATA)
	5 x SATA: 6Gb/s (RAID 0/1/5/10 supported)
I/O Interface
Display Output	1 x Display Port: up to 4096 x 2304 @ 60 Hz
	1 x HDMI: up to 4096 x 2304 @ 30 Hz
	1 x VGA: up to 1920 x 1080 @ 60 Hz
Ethernet	3 x LAN- LAN1: Intel® I225V 2.5GbE controller LAN2: Intel® I225V 2.5GbE controller LAN3: Intel® I225V 2.5GbE controller
Audio	1 x Front Audio: 2×5 pin, p=2.54
	1 x HD Audio: Realtek ALC888S HD Audio codec supports 7.1-channel
	1 x Line in(CD/DVD or other audio source input port)
	1 x Line out(connect this port to headphone or speaker)
	1 x Mic(connect this port to microphone)
I/O Interface	1 x DIO: 12-bit digital I/O (2×7 pin, p=2.0)
	1 x External RS-232: DB-9
	2 x External USB 2.0: Type-A
	2 x External USB 3.2 Gen1x1: 5Gb/s (Type-A)
	2 x External USB 3.2 Gen2x1: 10Gb/s (Type-A)
	2 x Internal RS-232: 2×5 pin, p=2.54
	1 x Internal RS-422/485: 1×4 pin, p=2.0
	6 x Internal USB 2.0: 2×4 pin, p=2.54
	2 x Internal USB 3.2 Gen1x1: 2×10 pin, p=2.0
Expansion	1 x M.2(NGFF): M-key 2242/2280 (PCIe x2, SATA)
	2 x PCIe x1
	2 x PCIe x16(x8 signal)
	3 x PCIe x4
Other Features
TPM	Intel® PTT(TPM 2.0)
Power
Power Consumption	3.3V@1.1A, 5V@3.359A, 12V@2.18A, 5VSB@0.12A (Intel® Core i5-10500TE CPU with four 8 GB 2933 MHz DDR4 DIMMs)
Power Supply	ATX/AT power supply Support AT/ATX mode ErP/EuP compliant
Environment
Operating Temperature	0°C ~ 60°C
Storage Temperature	-30°C ~ 70°C

ORDERING

IMBA-Q471-R10	ATX motherboard supports LGA1200 Intel® 10th/11th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor, DDR4, triple independent displays, triple 2.5GbE LAN, pure PCIe slots，M.2, USB 3.2, SATA 6Gb/s, HD Audio and RoHS

PACKAGE CONTENTS

The post IMBA-Q471 – ATX Motherboard Supports 10th/11th Gen. Intel® Core™ i9/i7/i5/i3, Celeron® and Pentium® Processors appeared first on Miller Technologies.

SPECIFICATIONS

System
CPU	6th generation Intel® Core mobile processor Intel® Core i7-6820EQ (up to 3.5GHz, quad-core, 8M cache, TDP=45W) Intel® Core i5-6440EQ (up to 3.4GHz, quad-core, 6M cache, TDP=45W) Intel® Core i3-6102E (up to 1.90GHz, dual-core, 3M cache, TDP=25W) Intel® Celeron® G3902E (up to 1.60GHz, dual-core, 2M cache, TDP=25W)
Chipset	Intel® QM170
Memory	Two 260-pin 2133/1866 MHz dual-channel unbuffered DDR4 SDRAM SO-DIMMs
Memory Max.	64GB
Physical Characteristics
Dimensions (LxWxH) (mm)	170 X 170
Net Weight	450g
Storage
Storage	4 x SATA :6Gb/s(RAID 0/1/5/10 support)
I/O Interface
Display Output	3 x HDMI :2 X 1.4 (up to 4096×2160@24Hz); 1 X 2.0(up to 4096×2160@60Hz);
	1 x LVDS :18/24-bit dual-channel (up to 1920×1200@60Hz)
Ethernet	2 x LAN :LAN1: Intel® I219LM with (Intel® AMT 11.0 support) LAN2: Intel® I211 PCIe controller with NCSI support
Audio	Description: Realtek ALC662 HD Audio codec supports 5.1-channel
	1 x Line out :on rear IO(colay wirh 3 X audio jack)
	1 x Mic :on rear IO(colay wirh 3 X audio jack)
	1 x Front Audio :2×5 pin
I/O Interface	1 x External RS-232
	3 x Internal RS-232 :1×9 pin, P=1.25
	2 x Internal RS-232/422/485 :1×9 pin, P=1.25
	4 x External USB 3.2 Gen1x1
	4 x Internal USB 2.0 :2×4 pin, p=2.0
	1 x PS/2 :1×6 pin, p=2.0
Expansion	1 x PCIe x16
	2 x PCIe mini Card Slot :1 x Full-size slot(support mSATA), 1 X Half-size slot
	1 x M.2(NGFF) :2230(A key)
Power
Power Consumption	12V@5.08A (Intel® Core i7-6820EQ, 3.5GHz CPU with 16 GB (two 8 GB) 2133 MHz DDR4 memory)
Power Supply	12V DC input 1 x External DC jack (4-pin DIN) 1 x Internal power connector (2×2 pin) Support AT/ATX mode
Environment
Operating Temperature	-20°C ~ 60°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

ORDERING

KINO-DQM170-i7-R10	Mini-ITX SBC supports 6th Intel® Core i7-6820EQ processor(45W), HDMI 2.0, SATA 6Gb/s, dual Intel® GbE, USB 3.0, PCIe Mini, M.2, HD Audio and RoHS
KINO-DQM170-i5-R10	Mini-ITX SBC supports 6th Intel® Core i5-6440EQ processor(45W), HDMI 2.0, SATA 6Gb/s, dual Intel® GbE, USB 3.0, PCIe Mini, M.2, HD Audio and RoHS
KINO-DQM170-i3E-R10	Mini-ITX SBC supports 6th Intel® Core i3-6102E processor(25W), HDMI 2.0, SATA 6Gb/s, dual Intel®GbE, USB 3.0, PCIe Mini, M.2, HD Audio and RoHS
KINO-DQM170-CE-R10	Mini-ITX SBC supports 6th Intel® Celeron® Processor G3902E(25W), HDMI 2.0, SATA 6Gb/s, dual Intel®GbE, USB 3.0, PCIe Mini, M.2, HD Audio and RoHS

PACKAGE CONTENTS

The post KINO-DQM170 – Mini-ITX SBC supports 6th Intel® Core™ Mobile CPU appeared first on Miller Technologies.

SPECIFICATIONS

ORDERING

PACKAGE CONTENTS

The post tKINO-AL – Thin Mini-ITX SBC for Intel® 14nm Atom™, Pentium® or Celeron® on-board SoC with DP++ appeared first on Miller Technologies.

SPECIFICATIONS

ORDERING

PACKAGE CONTENTS

The post gKINO-DMF – Mini-ITX SBC supports AMD Merlin Falcon SoC Processor appeared first on Miller Technologies.

SPECIFICATIONS

Form Factor
Form Factor	Mini-ITX Motherboard
System
CPU	LGA1200 Intel® 10th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor
Chipset	Intel® H420E
Memory	Two 260-pin 2933 MHz Dual-Channel DDR4 SO-DIMMs supported up to 64GB
Memory Max.	up to 64GB
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 2 x System fan connector (1×4 pin)
Physical Characteristics
Dimensions (LxWxH) (mm)	170mm x 170mm
Net Weight	400g
Storage
Storage	2 x SATA : 6Gb/s (no RAID)
	1 x M.2(NGFF) : B key (support NVME storage)
I/O Interface
Display Output	1 x HDMI up to 4096 x 2160 @30Hz
	1 x Display Port up to 4096 x 2304 @60Hz
Ethernet	3 x LAN – LAN1: Intel® i225LM GbE controller (colay i225v) LAN2: Intel® i225v GbE controller (colay i225LM) LAN3: Intel® i225v GbE controller (colay i225LM)
Audio	1 x Line out
	1 x Mic
	1 x Front Audio : 2×5 pin
	1 x HD Audio : Realtek ALC888S HD codec
I/O Interface	2 x External RS-232
	1 x Internal RS-232 : 2×5 pin, P=2.00
	1 x Internal RS-422/485 : RS-485 support AFC
	2 x External USB 2.0 : Type-A
	4 x External USB 3.2 Gen1x1 : 5Gb/s(Type-A)
	2 x Internal USB 2.0 : 2×4 pin, P=2.00
	1 x DIO : 8-bit digital I/O (2×5 pin)
Expansion	1 x PCIe x16
	2 x M.2(NGFF) – 1 x M.2 A key (2230) (PCIe Gen 3 x1/USB 2.0) 1 x M.2 B key (3042/3052/2242/2280) w/ SIM holder (PCIe Gen 3 x2/USB 2.0)
Other Features
TPM	Intel® PTT(TPM 2.0)
Power
Power Consumption	12V@12.408A (Intel® Core i7-10900E CPU with two 32 GB 2933 MHz DDR4 memory, EuP/ErP mode disabled)
Power Supply	DC 12V input 1 x ATX power connector (2×4 pin) 1 x DIN 4-pin DC Jack Support AT/ATX mode ErP/EuP Compliant
Environment
Operating Temperature	0°C – 60°C
Storage Temperature	-30°C – 70°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

ORDERING

KINO-DH420-R10	Mini-ITX SBC supports LGA1200 Intel® 10th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor, DDR4, dual independent displays, triple 2.5GbE LAN, M.2, SATA 6Gb/s, HD Audio and RoHS

PACKAGE CONTENTS

The post KINO-DH420 – Mini-ITX SBC supports LGA1200 Intel® 10th Generation Core™ i9/i7/i5/i3/ Pentium®/Celeron® CPU appeared first on Miller Technologies.

SPECIFICATIONS

System
CPU	11th Gen. Intel® Tiger Lake-UP3 Processor Intel® Core i7-1185G7E (up to 4.8GHz, quad-core, 12M Cache, TDP=28/15/12W) Intel® Core i5-1145G7E (up to 4.4GHz, quad-core, 8M Cache, TDP=28/15/12W) Intel® Core i3-1115G4E (up to 4.1GHz, quad-core, 6M Cache, TDP=28/15/12W) Intel® Celeron® 6305 (up to 1.8GHz, dual core, 4M Cache, TDP=15W)
Memory	2 x 260-pin 3200 MHz DDR4 SO-DIMM support up to 64 GB
Memory Max.	up to 64GB
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 1 x System fan connector (1×4 pin)
Storage
Storage	2 x SATA : 6Gb/s with 5V SATA power connector
	1 x M.2(NGFF) : M Key (2242/2280) with PCIe Gen3 x2, support NVME storage
I/O Interface
Display Output	1 x HDMI : up to 4096 x 2160@30Hz
	1 x Display Port : up to 4096 x 2160@60Hz
	1 x iDPM : IEI iDPM 3040 slot (only for IEI eDP/LVDS/VGA module)
Ethernet	2 x LAN – LAN1: Intel® I225V 2.5GbE controller LAN2: Intel® I225V 2.5GbE controller
Audio	1 x HD Audio: 1 x iAUDIO, supports IEI AC-KIT-888S Audio Module (2 x 5 pin)
I/O Interface	5 x Internal RS-232 : 2×5 pin, P=2.0
	1 x Internal RS-422/485 : 2×5 pin, P=2.00, RS-485 support AFC
	2 x Internal USB 2.0 : 2×4 pin, P=2.00
	1 x DIO : 12-bit digital I/O (2×7 pin)
	4 x External USB 3.2 Gen2x1 : 10Gb/s
Expansion	1 x PCIe x8 : x 4 signal
	2 x M.2(NGFF) – 1 x M.2 A key (2230) with PCIe Gen3 x1/USB 2.0 1 x M.2 M key (2280/2242) with PCIe Gen3 x2
Other Features
TPM	Intel® PTT(TPM 2.0)
Power
Power Consumption	9V@9.19A, 12V@7.768A, 28V@3.119A, 36V@2.459A (Intel® Core i7-1185G7E CPU with one 8 GB 2933 MHz DDR4 SO-DIMM)
Power Supply	9 ~ 36V DC input 1 x Internal power connector (2×2 pin) 1 x External DC power Jackc (Ø5.5mm) ErP/EuP Compliant
Environment
Operating Temperature	0°C ~ 60°C
Storage Temperature	-30°C ~ 70°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

ORDERING

KINO-TGL-U-i7-R10	Mini-ITX SBC with Intel® Tiger Lake-UP3 Core i7-1185G7E Processor, DDR4 SO-DIMM, 10~28V DC input, Quad Display, SATA, Dual Intel® 2.5GbE, USB3.2, M.2, SoC, RoHS
KINO-TGL-U-i5-R10	Mini-ITX SBC with Intel® Tiger Lake-UP3 Core i5-1145G7E Processor, DDR4 SO-DIMM, 10~28V DC input, Quad Display, SATA, Dual Intel® 2.5GbE, USB3.2, M.2,SoC, RoHS
KINO-TGL-U-i3-R10	Mini-ITX SBC with Intel® Tiger Lake-UP3 Core i3-1115G4E Processor, DDR4 SO-DIMM, 10~28V DC input, Quad Display, SATA, Dual Intel® 2.5GbE, USB3.2, M.2, SoC, RoHS
KINO-TGL-U-C-R10	Mini-ITX SBC with Intel® Tiger Lake-UP3 Celeron® 6305 Processor, DDR4 SO-DIMM, 10~28V DC input, Quad Display, SATA, Dual Intel® 2.5GbE, USB3.2, M.2, SoC, RoHS

PACKAGE CONTENTS

The post KINO-TGL-U – Thin Mini-ITX SBC supports Intel® 11th Gen i3/i5/i7/Celeron Tiger Lake-UP3 Processor appeared first on Miller Technologies.

FULL SIZE PICMG 1.3

Standard PICMG 1.3 SBCs have several advantages over non-standard SBCs. Firstly, they are more maintainable than a motherboard system and have a much lower mean time to repair (MTTR). Secondly, it is easy to upgrade to a newer or faster processor if desired.

PERFORMANCE BOOST
The 10th and 11th Gen Intel® Core processors, ranging from 6 to 10 cores, with increased I/O capacity and the latest DDR4-2933 memory support deliver the performance required to consolidate multiple industrial workloads. The CPU benchmark boosts up to 85% better integer multi-tasking compute intensive application performance on 11th Gen Intel® Core i5 processor.

DATA PROTECTION

REDUNDANT NETWORKING CONNECTION
With dual LAN configuration, the network redundancy for an internet connection has backup connectivity to switch the network from the first LAN input to the other LAN input automatically to avoid and mitigate the risk of downtime.

MULTIPLE DEVICE CONNECTION
With dual LAN configuration, the single-board computer is capable of connecting various devices such as sensors, multiple cameras, or other hardware that connects to an industrial SBC.

NETWORKING

M.2 B Key with SIM Slot for LTE Cellular Communication

The M.2 B key supporting PCI Express 3.0 x2 signals plus onboard SIM slot allows you to use a LTE radio frequency to ensure secure and delay-free data transmission in smart manufacturing.

M.2 2230 A Key for Wi-Fi/Bluetooth

The M.2 2230 A key slot carrying with PCIe 3.0 x2 and USB 2.0 signals allows it to adopt the latest Wi-Fi 6E technology. Wi-Fi 6E enhances low latency and supports service levels that are equivalent to 5G networks.

INSTANT SYSTEM-LEVEL SOLUTION
To suit different AIoT applications, we offer a comprehensive range of PICMG 1.3 passive backplanes and industrial chassis to give system designers expanded options for integrating multi-level processors within a variety of configurations.

SPECIFICATIONS

Form Factor
Form Factor	Full Size Single Board Computer
System
CPU	LGA1200 Intel® 10th/11th Gen. Core i9/i7/i5/i3,Pentium® and Celeron® processor (Support up to 65w)
Chipset	Intel® Q470/Q470E
Memory	4 x 288-pin 2933 MHz Dual-channel DDR4 DIMMs support up to 128G
Memory Max.	up to 128GB
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 1 x System fan connector (1×4 pin)
Physical Characteristics
Dimensions (LxWxH) (mm)	338 mm x 126 mm
Net Weight	500g
Storage
Storage	4 x SATA : 6Gb/s (Support RAID 0/1/5/10)
	1 x M.2(NGFF) : M Key (2280/2242) (with PCIe Gen3 x4), support NVME storage
I/O Interface
Display Output	1 x HDMI : up to 4096 x 2160@30Hz
Ethernet	2 x LAN : LAN1: Intel® I225V 2.5GbE controller LAN2: Intel® I225V 2.5GbE controller
Audio	1 x HD Audio : 1 x IAUDIO, support IEI AC-KIT-888S Audio Module (2 x 5 pin)
I/O Interface	2 x Internal RS-232 : 2×5 pin, P=2.0
	2 x Internal RS-422/485 : 1×4 pin, P=2.00 ,RS-485 support AFC
	2 x External USB 3.2 Gen1x1 : 5Gb/s (Type-A)
	6 x Internal USB 2.0 : 2×4 pin, P=2.54
	3 x Internal USB 3.2 Gen1x1 : 2 x USB 3.2 Gen1 (5Gb/s) (2×10 pin，P=2.00) 1 x USB 3.2 Gen1 (Type A 180°)
	DIO : 12-bit digital I/O (2×7 pin)
	1 x External USB 3.2 Gen2x1 : 10Gb/s (Type-C)
Expansion	1 x PCIe x16 : signal from CPU via golden finger (supports x16, or x8 + x8, or x4 + x4 + x8)
	1 x PCIe x4 : signal from PCH via golden finger (supports x4, or x1 + x1 + x1 + x1)
	4 x PCI Slot : signal via golden finger
	3 x M.2(NGFF) : 1 x M.2 A Key (2230) (with PCIe Gen3 x2/USB 2.0) 1 x M.2 B Key(3042/3052/2280) w/ SIM holder (with PCIe Gen3 x2) 1 x M.2 M Key (2280/2242) (with PCIe Gen3 x4)
Power
Power Supply	ATX/AT power supply Support AT/ATX mode ErP/EuP Compliant
Environment
Operating Temperature	0°C – 60°C
Storage Temperature	-30°C – 70°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

PCIE-Q470-R10	Full-size PICMG 1.3 CPU Card supports LGA1200 Intel® 10th Gen. Core i9/i7/i5/i3/Pentium®/Celeron® CPU with Q470E, DDR4, HDMI, Type-C DP, Dual Intel® 2.5GbE, USB 3.2, SATA 6Gb/s, M.2, HD Audio, iAMT and RoHS

PACKAGE CONTENTS

Package Contents	1 x PCIE-Q470 single board computer 2 x SATA cable 1 x I/O shielding 1 x QIG

The post PCIE-Q470 – Full-size PICMG 1.3 CPU Card supports LGA1200 Intel® 10th/11th Gen. Core™ i9/i7/i5/i3, Pentium®, Celeron® CPU appeared first on Miller Technologies.

Enhanced CPU and Graphics Performance
10th Gen/11th Gen Intel® Core Processors

The IEI IMBA-Q470 motherboard supports both 10th and 11th Gen Intel® Core processors, and the performance boosts up to 80% better than previous generation on i5 processor. The 10th Gen Intel® Core platform supports up to 10 cores and improved performance over Coffee Lake-Refresh. With increased I/O capacity and the latest DDR4-2933 memory support, these processors deliver the performance required to consolidate industrial multiple workloads.

Because of the above features, the IMBA-Q470 is suitable for edge computing, industrial automation, medical equipment, machine vision, automated test equipment and much more.

10th Gen Intel® Embedded CPU Support List

Up to 10 cores / 20 threads in LGA1200 socket

Stunning 4K Resolution and Triple Display

The IMBA-Q470 is equipped with Intel® UHD Graphics to display videos and images in stunning 4K resolutions. Among its three independent display ports (VGA+HDMI+DP), the HDMI and DisplayPort can both support up to 4K high resolution. The enhanced visual quality responses the high precision demand of users.

Leading Connectivity
Dual Intel® 2.5G Ethernet

The IMBA-Q470 is equipped with two Intel 2.5GbE controllers, which are ready for the latest-performance router. With two 2.5GbE ports owning the benefits of low-latency, high-throughput and cost-effective, the IMBA-Q470 can meet the bandwidth-intensive requirements such as large file transfers and high-resolution video streaming, which is ideal for machine vision and AI edge computing applications.

PCIe x16/4 & PCI Expansion Slots

There is an array of expansion interfaces on the IMBA-Q470 to meet different demands of each customer. It supports up to three PCI, three PCIe x4, and one PCIe x16 slot, which can be used to install a variety of interface cards, including motion control cards, frame grabber cards, video capture cards, I/O cards, communication cards, AI accelerator cards and GPGPU cards.

Ready for Windows 11

SPECIFICATIONS

Form Factor
Form Factor	ATX Motherboard
System
CPU	LGA1200 Intel® 10/11th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor
Chipset	Intel® Q470/Q470E
Memory	Four 288-pin 2933 MHz Dual-Channel DDR4 SDRAM Unbuffered DIMMs supported up to 128GB
Memory Max.	up to 128GB
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 2 x System fan connector (1×3 pin)
Physical Characteristics
Dimensions (LxWxH) (mm)	244mm x 305mm
Net Weight	GW:1200g / NW:700g
Storage
Storage	4 x SATA
	1 x M.2(NGFF) : 1 x M.2 M Key (2240/2280) with PCIe x4
I/O Interface
Display Output	1 x VGA Up to 1920 x 1080 @60Hz
	1 x HDMI
	1 x Display Port
Ethernet	2 x LAN: LAN1: Intel® I225V 2.5GbE controller LAN2: Intel® I225V 2.5GbE controller
Audio	1 x Line in
	1 x Line out
	1 x Mic
	1 x Front Audio: 2×5 pin
I/O Interface	2 x External RS-232
	1 x External RS-232/422/485: RS-485 support AFC
	2 x Internal RS-232: 2×5 pin, P=2.54
	1 x Internal RS-232/422/485: 2×5 pin, P=2.54, RS-485 support AFC
	2 x External USB 2.0: Type-A
	2 x External USB 3.2 Gen1x1 : 5Gb/s(Type-A)
	5 x Internal USB 2.0: 2×4 pin, P=2.54
	2 x Internal USB 3.2 Gen1x1: 2×10 pin, p=2.0
	1 x DIO: 8-bit digital I/O (2×5 pin
	2 x External USB 3.2 Gen2x1 : 10Gb/s (Type-A）
Expansion	1 x PCIe x16
	3 x PCIe x4
	3 x PCI Slot
	2 x M.2(NGFF) : 1 x M.2 M-key 2242/2280 (PCIe x4) 1 x M.2 A-key 2230 (PCIe x1 / USB 2.0)
Power
Power Consumption	3.3V@1.36A, 5V@14.16A, 12V@7.5A (Intel® Core i9-10900E CPU with four 32 GB 3200 MHz DDR4 memory)
Power Supply	ATX/AT power supply Support AT/ATX mode ErP/EuP Compliant
Environment
Operating Temperature	0°C – 60°C
Storage Temperature	-30°C – 70°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

ORDERING

IMBA-Q470-R10	ATX motherboard supports LGA1200 Intel® 10th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor, DDR4, triple independent displays, dual 2.5GbE LAN, M.2, USB 3.2, SATA 6Gb/s, HD Audio and RoHS

OPTIONS

Package Contents

• 1 x IMBA-Q470 single board computer
• 2 x SATA cable
• 1 x I/O shielding
• 1 x QIG

The post IMBA-Q470 – ATX Motherboard Supports 10th/11th Gen Core i9/i7/i5/i3, Celeron and Pentium appeared first on Miller Technologies.

LEADERSHIP PERFORMANCE

The IMBA-H420 motherboard supports both 10th and 11th Gen Intel® Core processors, which boosts up to 80% better performance than its precedent (Core i5 processor). The 10th Gen Intel® Core platform supports up to 10 cores and improved performance over Coffee Lake-Refresh. The 10th Gen Intel® Core processors contain Intel® UHD Graphics 630 that offers 24 execution units and support outstanding 4K displays.

With the combination of new Intel Core processor technology and graphics architecture, the IMBA-H420 delivers superior computing power that sets it apart from other products available in the market.

Pixel-accurate 4K Resolution

The IMBA-H420 is equipped with three display output connectors, including HDMI, internal DP++ and VGA. The HDMI and DP++ interfaces support pixel-accurate 4K resolutions for high-end applications while the VGA is reserved for legacy devices.

DP++ Supported

The IMBA-H420 provides various display outputs for customers to connect to a device with the same native interface to avoid quality loss. However, when conversion is needed, the equipped DisplayPort Dual-Mode (DP++) connector allows the use of a simple, inexpensive passive adapter to convert to HDMI. It is completely plug and play, handles both video and audio, and does not need any driver to work.

Rich Expansion Options

Bringing together PCIe 3.0 technology and legacy PCI standard creates endless possibilities in developing a wide range of solutions. A graphics card or AI card can be added via the PCIe x16 for sophisticated applications, like medical diagnosis, machine vision, robotics or AI-based projects.

Four PCI slots are also provided to maintain backward compatibility. Legacy systems in machine controllers, test rigs, real-time simulations or many other PC-based applications can be upgraded easily without a full rebuild.

Tap into the Power of AI

In recent years, Edge AI has become a virtual role. We are now at a time where AI is revolutionizing the world. The IMBA-H420 can deliver excellent computing capabilities to accelerate AI adoption in food/fruit inspection, factory automation and test equipment. By adding IEI’s Mustang accelerator card, it could be used for deep learning inference computing to help you get faster, deeper insights for your customers and your business.

2.5GBASE-T Ethernet Technology

The 2.5GBASE-T speed is a contemporary solution to an old problem due to the increases in throughput. Enterprises that choose the IMBA-H420 as their solutions for the implementation of 2.5GBASE-T technology will benefit from a simple change that achieves a noticeable gain in bandwidth, while at the same time realizing cost savings from reuse of existing Cat5e cables.

Touch-enabled BIOS

The BIOS menu in our latest products is re-designed as a touch-enabled user interface to eliminate excessive steps and unnecessary keyboard connection. It allows users to navigate with finger on a touch-enabled monitor to make BIOS configuration easily. The new design features the followings:

Graphical interface

BIOS menus have been transformed from text-based to graphical user interface, making it intuitive and easy to navigate.

Shortcut to boot device setup

The main menu provides quick access to the boot device configuration, helping users save time on boot option priority setting.

Easy-access function keys

The BIOS function keys are arranged vertically on the side of the screen and indicated by icons, so that users can access them without the need of using a keyboard.

On-screen keyboard

An on-screen keyboard is available when it is needed to enter text in BIOS, such as administration password setup.

Contact Us today for IMBA-H420 pricing.

SPECIFICATIONS

Form Factor
Form Factor	ATX Motherboard
System
CPU	LGA1200 Intel® 10/11th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor
Chipset	Intel® H420E
Memory	Two 288-pin 2933 MHz Dual-Channel DDR4 SDRAM Unbuffered DIMMs supported up to 64GB
Memory Max.	up to 64GB
Cooling method / System Fan	1 x CPU fan connector (1×4 pin) 2 x System fan connector (1×4 pin)
Physical Characteristics
Dimensions (LxWxH) (mm)	244mm x 305mm
Net Weight	700g
Storage
Storage	4 x SATA: 6Gb/s (no RAID)
I/O Interface
Display Output	1 x VGA: up to 1920 x 1200@60Hz
	1 x HDMI: up to 4096 x 2160@30Hz
	1 x DP++: up to 4096 x 2304@60Hz
Ethernet	1 x LAN: LAN1: Intel® I225V 2.5GbE controller
Audio	1 x Line in
	1 x Line out
	1 x Mic
	1 x Front Audio: 2×5 pin
	1 x HD Audio: Realtek ALC888S HD codec
I/O Interface	1 x External RS-232
	External RS-232/422/485: RS-485 support AFC
	4 x Internal RS-232: 2×5 pin, P=2.54
	1 x Internal RS-232/422/485: 2×5 pin, P=2.54
	2 x External USB 2.0: Type-A
	4 x External USB 3.2 Gen1x1: 5Gb/s(Type-A)
	2 x Internal USB 2.0: 2×4 pin, P=2.54
	1 x PS/2
	1 x DIO: 8-bit digital I/O (2×5 pin)
Expansion	1 x PCIe x16
	1 x PCIe x4
	4 x PCI Slot
Other Features
TPM	Intel® PTT (TPM 2.0)
Power
Power Consumption	3.3V@0.84A, 5V@8.12A, 12V@3.77A, 5VSB@0A (Intel® Core i5-10500TE CPU with two 32 GB 2933 MHz DDR4 memory, EuP mode enabled)
Power Supply	ATX/AT power supply Support AT/ATX mode ErP/EuP Compliant
Environment
Operating Temperature	0°C – 60°C
Storage Temperature	-30°C – 70°C
Humidity	5% ~ 95%, non-condensing
Certifications
Safety & EMC	CE/FCC compliant

ORDERING

IMBA-H420-R10	ATX motherboard supports 14nm LGA1200 Intel® 10th Generation Core i9/i7/i5/i3, Celeron® and Pentium® processor, DDR4, Triple independent displays, 2.5GbE LAN, USB 3.2, SATA 6Gb/s, HD Audio and RoHS

PACKAGE CONTENTS

• 1 x IMBA-H420 single board computer
• 2 x SATA cable
• 1 x I/O shielding
• 1 x QIG

The post IMBA-H420 – ATX Motherboard Supports 14nm LGA1200 Intel 10th/11th Generation Core i9/i7/i5/i3, Celeron and Pentium Processor appeared first on Miller Technologies.