PS/2 Type Power Supplies - Miller Technologies https://millertech.com/product-category/industrial-pcs/computer-pc-power-supplies/ps-2-power-supplies-computer-pc/ Industrial PCs, Panel PCs, LCD Monitors, LCD Modules & Kits, POP Video Signage Tue, 11 Jun 2024 17:48:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://millertech.com/wp-content/uploads/2019/06/cropped-favicon-192x192_bc36520a3bce3524891692412d_c9e91f015979bab3fcbde4bfed11d144-64x64.png PS/2 Type Power Supplies - Miller Technologies https://millertech.com/product-category/industrial-pcs/computer-pc-power-supplies/ps-2-power-supplies-computer-pc/ 32 32 63010-010600-010-RS – 600 W PS/2 ATX Power Supply with ErP https://millertech.com/product/63010-010600-010-rs-600-w-ps-2-atx-power-supply-with-erp/?utm_source=rss&utm_medium=rss&utm_campaign=63010-010600-010-rs-600-w-ps-2-atx-power-supply-with-erp Wed, 11 Jan 2023 15:54:38 +0000 https://millertech.com/?post_type=product&p=10189
  • 600 W
  • PS/2 ATX Power Supply with ErP

    • The post 63010-010600-010-RS – 600 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>     600 W PS/2 ATX Power Supply with ErP. Replaces part number ACE-A160B.

    SPECIFICATIONS

    Input
    Voltage 90~264 VAC Full Range
    Frequency 47 Hz ~ 63 Hz
    Input Current 8A (RMS)@115VAC, 4A (RMS)@230VAC
    Inrush Current 40A max. for 115VAC, 80A max. for 230VAC
    Output
    Voltage +3.3V/25A,+5V/25A,+12V1/16A,+12V2/16A,+12V3/16A,+12V4/16A,-12V/0.5A,+5Vsb/4A,-5V/0.5A
    Over Voltage Protection +3.3V: 3.9V-4.5V
    +5V: 5.7V-6.5V
    +12V1 ~ +12V4: 13.3V-16.7V
    Short Circuit Protection +3.3V, +5V, +12V1, +12V2, +12V3, +12V4, 24V or -12V shutdown and latch off
    General
    Watt 600
    Efficiency 82%
    MTBF 100000
    Operating temperature 0°C ~ 50°C
    Storage temperature -20°C ~ 80°C
    Dimensions 140 x 150 x 86
    Output Connector 1 x 20+4-pin ATX,
    2 x 4-pin 12V CPU,
    9 x HDD/CDROM,
    1 x Graphics card power,
    2 x FDD,2 x SATA

    ORDERING

    63010-010600-010-RS PS/2 Power; FSP; FSP600-80PSA(SK); 9PA6009824; Active PFC; Vin: 90~264VAC; 600W; 150*140*86mm; meet 80plus (BRONZE); Vout: ATX; ATX; CCL; RoHS

    The post 63010-010600-010-RS – 600 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>         63010-010400-020-RS – 400 W PS/2 ATX Power Supply with ErP https://millertech.com/product/63010-010400-020-rs-400-w-ps-2-atx-power-supply-with-erp/?utm_source=rss&utm_medium=rss&utm_campaign=63010-010400-020-rs-400-w-ps-2-atx-power-supply-with-erp Wed, 11 Jan 2023 15:47:10 +0000 https://millertech.com/?post_type=product&p=10188
  • 400 W
  • PS/2 ATX Power Supply with ErP

    • The post 63010-010400-020-RS – 400 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>     400 W PS/2 ATX Power Supply with ErP. Replaces the ACE-A140B-R11.

    SPECIFICATIONS

    Input
    Voltage 90~264 VAC Full Range
    Frequency 47 Hz ~ 63 Hz
    Input Current 5A (RMS)@115VAC, 2.5A (RMS)@230VAC
    Inrush Current 80A max. for 115VAC, 160A max. for 230VAC
    Output
    Voltage +3.3V/21A, +5V/16A, +12V1/17A,+12V2/17A, -12V/0.5A, +5Vsb/3A, -5V/0.1A
    Over Voltage Protection +3.3V: 3.76V-4.3V
    +5V: 5.74V-7.0V
    +12V1 and +12V2: 13.4V-15.6V
    Short Circuit Protection +3.3V, +5V, +12V or -12V shutdown and latch off
    General
    Watt 400
    Efficiency 87%
    MTBF 100000
    Operating temperature 0°C ~ 50°C
    Storage temperature -20°C ~ 80°C
    Dimensions 140 x 150 x 86
    Output Connector 1 x 20+4-PIN ATX,
    2 x 4-pin 12V CPU,
    8 x HDD/CDROM,
    1 x Graphics card power,
    2 x FDD,
    2 x SATA

    ORDERING

    63010-010400-020-RS PS/2 Power; FSP; FSP400-70AGGBM; 9PA400CH07; Active PFC; Vin: 90~264VAC; 400W; 150*140*86mm; meet 80plus (GOLD); Vout: ATX; ATX; CCL; RoHS
    63010-010400-010-RS PS/2 Power; FSP; FSP400-70AGGBM; 9PA400CH06; Active PFC; Vin: 90~264VAC; 400W; meets 80plus (GOLD); Vout: ATX; ATX; CCL; RoHS

    The post 63010-010400-020-RS – 400 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>         63010-010300-020-RS – 300 W PS/2 ATX Power Supply with ErP https://millertech.com/product/63010-010300-020-rs-300-w-ps-2-atx-power-supply-with-erp/?utm_source=rss&utm_medium=rss&utm_campaign=63010-010300-020-rs-300-w-ps-2-atx-power-supply-with-erp Wed, 11 Jan 2023 15:37:48 +0000 https://millertech.com/?post_type=product&p=10186
  • 300 W
  • PS/2 ATX Power Supply with ErP

    • The post 63010-010300-020-RS – 300 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>     300 W PS/2 ATX Power Supply with ErP.

    SPECIFICATIONS

    Input
    Voltage 90~264 VAC Full Range
    Frequency 47 Hz ~ 63 Hz
    Input Current 4A (RMS)@115VAC, 2A (RMS)@230VAC
    Inrush Current 80A max. for 115VAC, 160A max. for 230VAC
    Output
    Voltage +3.3V/19A,+5V/16A,+12V1/17A,+12V2/17A,-12V/0.5A,+5Vsb/3A,-5V/0.1A
    Over Voltage Protection +3.3V: 3.7V-4.3V
    +5V: 5.74V-7.0V
    +12V1 and +12V2: 13.4V-15.6V
    Short Circuit Protection +3.3V, +5V, +12V or -12V shutdown and latch off
    General
    Watt 300
    Efficiency 87%
    MTBF 100000
    Operating temperature 0°C ~ 50°C
    Storage temperature -20°C ~ 80°C
    Dimensions 140 x 150 x 86
    Output Connector 1 x 20+4-PIN ATX,
    2 x 4-pin 12V CPU,
    7 x HDD/CDROM,
    1 x Graphics card power,
    1 x FDD,
    2 x SATA

    ORDERING

    63010-010300-030-RS PS/2 Power; FSP; FSP300-70AGGBM; 9PA300FJ07; Active PFC; Vin:90~264VAC; 300W; 150*140*86mm; meet 80plus (GOLD); Vout: ATX; ATX; CCL; RoHS
    63010-010300-020-RS PS/2 Power; FSP; FSP300-70AGGBM; 9PA300FJ08; Active PFC; Vin: 90~264VAC; 300W; meet 80plus (GOLD); Vout: ATX; ATX; CCL; RoHS

    The post 63010-010300-020-RS – 300 W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>         BHG2-5300V – 300W DC Input PS/2 ATX Power Supply https://millertech.com/product/bhg2-5300v-300w-dc-input-ps-2-power-supply/?utm_source=rss&utm_medium=rss&utm_campaign=bhg2-5300v-300w-dc-input-ps-2-power-supply Fri, 18 Sep 2020 12:52:12 +0000 https://millertech.com/?post_type=product&p=6846
  • 300W
  • 18~36VDC Input
  • Potential Replacement for the IEI ACE-828C-RS

    • The post BHG2-5300V – 300W DC Input PS/2 ATX Power Supply appeared first on Miller Technologies.

    ]]>     BHG2-5300V 300W DC Input PS/2 ATX Power Supply.

    SPECIFICATIONS

    OUTPUT WATTAGE
    300w

    DIMENSIONS
    140 x 150 x 86 (mm)
    5.51 x 5.91 x 3.39 (inch)

    INPUT SPEC
    VOLTAGE: 18 ~ 36VDC
    INPUT CURRENT: 18 ~ 36VDC / 22~11 AMP (16 AMPS AT 24VDC)
    INRUSH CURRENT: 50AMPS @ 24VDC

    DC OUTPUT SPEC

    Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
    +5V 1 25 ±5% ± 1% 50mV
    +12V 2 25 ±5% ± 1% 120mV
    -12V 0 0.8 ±10% ± 1% 120mV
    +3.3V 0.5 25 ±5% ± 1% 50mV
    +5VSB 0.1 2.5 ±5% ± 1% 50mV

    * +5V AND +3.3V TATOL OUTPUT MAX: 30A
    * TOTAL OUTPUT MAX: 300W
    * TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃, STORAGE -20℃~80℃
    * HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 12V MUST BE MAINTAIN 1MSEC AT 24V
    * EFFICIENCY: >80% TYPICAL AT 24V, FULL LOAD
    * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
    * OVER POWER PROTECTION: 130%~170%
    * OVER VOLTAGE PROTECTION: +5V→5.6V～6.5V, +3.3V→3.6V～4.3V, +12V→13.2V～15V
    * SHORT CIRCUIT PROTECTION: +5V、+12V、-12V、+3.3V
    * OVER CURRENT PROTECTION: +3.3V→28~40A, +5V→28~40A, +12V→36~49.5A
    * SAFETY: TO MEET UL, CUL, TUV, CCC
    * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B

    The post BHG2-5300V – 300W DC Input PS/2 ATX Power Supply appeared first on Miller Technologies.

    ]]>         PSM-5860V – 860W PS/2 Power Supply https://millertech.com/product/psm-5860v-860w-ps-2-power-supply/?utm_source=rss&utm_medium=rss&utm_campaign=psm-5860v-860w-ps-2-power-supply Wed, 17 Jun 2020 20:08:06 +0000 https://millertech.com/?post_type=product&p=6421
  • TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃
  • HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
  • HUMIDITY: OPERATING:20%-80%, NON-OPERATING:10%-90%
  • EFFICIENCY: TYPICAL 80-85% AT 25℃ 115V FULL LOAD
  • OVER POWER PROTECTOIN: 110%~150%
  • OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.8~6.7V, +12V→13.2~15V
  • OVER CURRENT PROTECTION: +3.3V→29.7~40.2A, +5V→29.7~40.2A, +12V→63.7~86.2A
  • SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
  • RESTART AFTER PROTECTION: IF THE PSU IS USING AC POWER SWITCH TO CONTROL ON/OFF, IT HAS TO BE SWITCHED OFF AT LEAST FOR 5 SECONDS TO RESTART THE UNIT
  • SAFETY: TO MEET UL, CUL, TUV, CCC
  • COOLING: ONE 60 mm DC FAN

    • The post PSM-5860V – 860W PS/2 Power Supply appeared first on Miller Technologies.

    ]]>     PSM-5860V – 860W PS/2 Power Supply.

    SPECIFICATIONS
    DIMENSIONS
    160x150x86(mm)
    6.3×5.91×3.39(inch)

    INPUT SPEC
    VOLTAGE: 90 ~ 264 VAC FULL RANGE
    FREQUENCY: 47 ~ 63 HZ
    INPUT CURRENT: 12 A ( RMS ) FOR 115VAC / 6A ( RMS ) FOR 230VAC
    INRUSH CURRENT: 20A MAX. FOR 115 VAC / 40A MAX. FOR 230 VAC
    PFC CAN REACH THE TARGET OF 95% @230V, FULL LOAD

    DC OUTPUT SPEC

    Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
    +5V 0.5 25 ±5% ±1% 50mV
    +12V 1 60 ±5% ±1% 120mV
    -12V 0 0.8 ±5% ±1% 120mV
    +3.3V 0.5 25 ±5% ±1% 50mV
    +5VSB 0.1 3.5 ±5% 50mV

    The post PSM-5860V – 860W PS/2 Power Supply appeared first on Miller Technologies.

    ]]>         ACE-A130C – 300W PS/2 ATX Power Supply with ErP (Replaces the ACE-A130A and ACE-A130B) https://millertech.com/product/ace-a130c/?utm_source=rss&utm_medium=rss&utm_campaign=ace-a130c Thu, 02 May 2019 19:29:42 +0000 https://millertech.com/?post_type=product&p=1002 FEATURES

    • 300 W PS/2 ATX Power Supply with ErP

    The post ACE-A130C – 300W PS/2 ATX Power Supply with ErP (Replaces the ACE-A130A and ACE-A130B) appeared first on Miller Technologies.

    ]]>     ACE-A130C-R10 300W PS/2 ATX Power Supply with ERP/PFC & optional ON/OFF power switch (ACE-A130C-S-R10). Meets 80 plus (Gold). RoHS. Replaces the ACE-A130A and ACE-A130B.

    SPECIFICATIONS

    General
    Dimensions 140 x 150 x 86
    Efficiency 87%
    MTBF 100000
    Operating temperature 0°C ~ 50°C
    Output Connector 1 x 20+4-PIN ATX,
    1 x 4-pin 12V CPU,
    7 x HDD/CDROM,
    1 x Graphics card power,
    1 x FDD,
    2 x SATA
    Storage temperature -20°C ~ 80°C
    Watt 300
    Input
    Voltage 90~264 VAC Full Range
    Frequency 47 Hz ~ 63 Hz
    Input Current 4A (RMS)@115VAC, 2A (RMS)@230VAC
    Inrush Current 80A max. for 115VAC, 160A max. for 230VAC
    Output
    Voltage +3.3V/19A,+5V/16A,+12V1/17A,+12V2/17A,-12V/0.5A,+5Vsb/3A,-5V/0.1A
    Over Voltage Protection +3.3V: 3.7V-4.3V
    +5V: 5.74V-7.0V
    +12V1 and +12V2: 13.4V-15.6V
    Short Circuit Protection +3.3V, +5V, +12V or -12V shutdown and latch off

    ORDERING

    ACE-A130C-R11 300W PS/2 ATX Power Supply with ERP& PFC, meets 80 plus (Gold); RoHS
    ACE-A130C-S-R11 300W PS/2 ATX Power Supply with ERP/PFC & on/off switch, meets 80 plus (Gold); RoHS

     

    The post ACE-A130C – 300W PS/2 ATX Power Supply with ErP (Replaces the ACE-A130A and ACE-A130B) appeared first on Miller Technologies.

    ]]>         ACE-A140B – 400W PS/2 ATX Power Supply with ErP https://millertech.com/product/ace-a140b/?utm_source=rss&utm_medium=rss&utm_campaign=ace-a140b Thu, 02 May 2019 19:27:54 +0000 https://millertech.com/?post_type=product&p=1001 FEATURES

    • 400 W PS/2 ATX Power Supply with ErP

    The post ACE-A140B – 400W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>     ACE-A140B-R10 400W PS/2 ATX Power Supply with ERP & optional ON/OFF power switch (ACE-A140B-S-R10). Meets 80 plus (Gold). RoHS.

    SPECIFICATIONS

    General
    Dimensions 140 x 150 x 86
    Efficiency 87%
    MTBF 100000
    Operating temperature 0°C ~ 50°C
    Output Connector 1 x 20+4-PIN ATX,
    1 x 4-pin 12V CPU,
    8 x HDD/CDROM,
    1 x Graphics card power,
    2 x FDD,
    2 x SATA
    Storage temperature -20°C ~ 80°C
    Watt 400
    Input
    Voltage 90~264 VAC Full Range
    Frequency 47 Hz ~ 63 Hz
    Input Current 5A (RMS)@115VAC, 2.5A (RMS)@230VAC
    Inrush Current 80A max. for 115VAC, 160A max. for 230VAC
    Output
    Voltage +3.3V/21A,+5V/16A,+12V1/17A,+12V2/17A,-12V/0.5A,+5Vsb/3A,-5V/0.1A
    Over Voltage Protection +3.3V: 3.76V-4.3V
    +5V: 5.74V-7.0V
    +12V1 and +12V2: 13.4V-15.6V
    Short Circuit Protection +3.3V, +5V, +12V or -12V shutdown and latch off

    ORDERING

    ACE-A140B-R11 400W PS/2 ATX Power Supply with ERP, meets 80 plus (Gold), RoHS
    ACE-A140B-S-R11 400W PS/2 ATX Power Supply with ERP & on/off switch, meets 80 plus (Gold); RoHS

     

    The post ACE-A140B – 400W PS/2 ATX Power Supply with ErP appeared first on Miller Technologies.

    ]]>