ACE-A140A 400W PS/2 ATX Power Supply with ErP

SPECIFICATIONS

ORDERING INFORMATION

PRICING
Miller Technologies strives to provide the very best and most competitive pricing we can. Please click here to request PRICING or a QUOTATION for any of the products on the following pages.

Specifications
Input Voltage: 90~264 VAC Full Range
Frequency: 47~63Hz
Input current: 6A(RMS)@115VAC, 3A(RMS)@230VAC
Inrush current: 65A max for 115VAC, 147A max for 230VAC
Output
Voltage Min. load Max. load Ripple & Noise
+3.3V 0.1A 21.0A 50mV
+5V 0.2A 20.0A 50mV
+12V1 0.1A 16.0A 120mV
+12V2 0.5A 16.0A 120mV
-12V 0A 0.5A 120mV
-5V 0A 0.3A 50mV
+5VSB 0A 3A 50mV
The +3.3V and +5V total output shall not exceed 130watts.
Total output for this subject power supply is 400 watts.
Over voltage protection +3.3V: 3.5V-4.5V
+5V: 5.5V-6.82V
+12V1 and +12V2: 13.4V-15.6V
Short circuit protection +3.3V, +5V, +12V or -12V shutdown and latch off

Output connector: 20PIN ATX x 1, 4PIN 12V CPU x 1, HDD/ CD ROM x 8, FDD x 2, Extra +5V(P10) x 1

Wattage 400W
PFC Active
Hold-up Time 17 ms Min.
Efficiency 85%
MTBF 100,000 hours
Storage Temperature -20˚C ~ 80˚C
Operation Temperature -5˚C ~ 50˚C
Dimensions 140 x 150 x 86 (mm)

   


CLICK HERE FOR LARGER IMAGE

Ordering Information
Part No. Description
ACE-A140A-R10 400W AC-DC PS/2 ATX Power Supply with ErP, Meets 80 PLUS (Bronze)
ACE-A140A-S-R10 400W PS/2 ATX Power Supply with ErP & on/off switch, Meets 80 PLUS (Bronze)